Toyota Corolla: Using the driving support systems / RCTA (Rear Cross Traffic Alert) function
The RCTA function uses the BSM rear side radar sensors installed behind the rear bumper. This function is intended to assist the driver in checking areas that are not easily visible when backing up.
System components
A - Meter control switches
Turning the RCTA function on/off. When the RCTA function is disabled, the RCTA OFF indicator illuminates.
B - Outside rear view mirror indicators
When a vehicle approaching from the right or left at the rear of the vehicle is detected, both outside rear view mirror indicators will flash.
C - Audio system display If a vehicle approaching from the right or left at the rear of the vehicle is detected, the RCTA icon for the detected side will be displayed on the audio system display. This illustration shows an example of a vehicle approaching from both sides of the vehicle.
D - RCTA buzzer
If a vehicle approaching from the right or left at the rear of the vehicle is detected, a buzzer will sound. The buzzer also sounds for approximately 1 second immediately after the RCTA function is turned on.
Blind Spot Monitor operation
■ Vehicles that can be detected by the Blind Spot Monitor
The Blind Spot Monitor uses rear side radar sensors to detect the following vehicles
traveling in adjacent lanes and advises the driver of the presence of such vehicles
via the indicators on the outside rear view mirrors...
Turning the RCTA function on/off
Use the meter control switches to enable/disable the RCTA function.
1 Press or
to select .
2 Press or
to select “RCTA” and then press .
When the RCTA function is disabled, the RCTA OFF indicator (®P...
Other information:
Toyota Corolla 2019-2024 Owners Manual: Automatic High Beam
The Automatic High Beam uses a camera sensor located behind the upper portion of the windshield to assess the brightness of the lights of vehicles ahead, streetlights, etc., and automatically turns the high beams on or off as necessary. WARNING ■Limitations of the Automatic High Beam Do not overly rely on the Automatic High Beam...
Toyota Corolla 2019-2024 Owners Manual: Checking and adding the brake fluid
■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. ■ Adding fluid 1 Slide and lift up the rubber strip to partly remove it as shown. 2 Disconnect the claws and remove the service cover. 3 Remove the reservoir cap...
Categories
- Manuals Home
- 12th Generation Corolla Owners Manual
- General settings
- Interior features
- Operating HomeLink
- New on site
- Most important about car
iMT (Intelligent Manual Transmission)
The iMT optimally controls the engine speed to suit the driver’s operation of the clutch pedal and shift lever, helping the driver to shift gears more smoothly. Additionally, when the clutch pedal is operated, the iMT helps reduce shift shock, allowing for lighter shift operations when driving on a winding road or incline.
Press the “iMT” switch.
