Toyota Corolla: Do-it-yourself maintenance / Hood
Opening the hood
1 Pull the hood lock release lever.
The hood will pop up slightly.
2 Pull the auxiliary catch lever to the left and lift the hood.
3 Hold the hood open by inserting the support rod into the slot.
WARNING
■ Pre-driving check
Check that the hood is fully closed and locked.
If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury.
■ After installing the support rod into the slot
Make sure the rod supports the hood securely preventing it from falling down onto your head or body.
NOTICE
■ When closing the hood
Be sure to return the support rod to its clip before closing the hood. Closing the hood with the support rod not clipped could cause the hood to bend.
Do-it-yourself service precautions
If you perform maintenance by yourself, be sure to follow the correct procedure
as given in these sections.
Maintenance
WARNING
The engine compartment contains many mechanisms and fluids that may move suddenly,
become hot, or become electrically energized...
Positioning a floor jack
When using a floor jack, follow the instructions in the manual provided with
the jack and perform the operation safely. When raising your vehicle with a floor
jack, position the jack correctly...
Other information:
Toyota Corolla 2019-2025 Owners Manual: Things you should know
■ If you notice any symptoms If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer. WARNING ■When using the rear view monitor system The rear view monitor system is a supplemental device intended to assist the driver when backing up...
Toyota Corolla 2019-2025 Owners Manual: Type D: Function achieved by using DCM and a smartphone
The functionality of Service Connect is made possible by the use of a DCM and a smartphone. Service Connect Service Connect uses DCM to collect and transmit vehicle data that allows Toyota to provide: Vehicle Health Report (VHR) (Safety Recalls, Service Campaigns, Current Vehicle Alerts, Required Maintenance, and Vehicle Condition Status) Maintenance Notifications Vehicle Alert Notificatio..
Categories
- Manuals Home
- 12th Generation Corolla Owners Manual
- iMT (Intelligent Manual Transmission)
- Maintenance and care
- Unlocking and locking the doors from the outside
- New on site
- Most important about car
General settings
Settings are available for clock, operation sounds, etc.
Displaying the general settings screen
1 Press the “MENU” button.
2 Select “Setup”.
If the general settings screen is not displayed, select “General”.
3 Select the desired items to be set.
