Toyota Corolla: PCS (Pre-Collision System) / System functions
■ Pre-collision warning
When the system determines that the possibility of a frontal collision is high,
a buzzer will sound and a warning message will be displayed on the multi-information
display to urge the driver to take evasive action.
■ Pre-collision brake assist
When the system determines that the possibility of a frontal collision is high,
the system applies greater braking force in relation to how strongly the brake pedal
is depressed.
■ Pre-collision braking
If the system determines that the possibility of a frontal collision is extremely
high, the brakes are automatically applied to help avoid the collision or reduce
the impact of the collision.
WARNING
■Limitations of the pre-collision system
- The driver is solely responsible for safe driving. Always drive safely,
taking care to observe your surroundings. Do not use the pre-collision system
instead of normal braking operations under any circumstances. This system will
not prevent collisions or lessen collision damage or injury in every situation.
Do not overly rely on this system. Failure to do so may lead to an accident,
resulting in death or serious injury.
- Although this system is designed to help avoid a collision or help reduce
the impact of the collision, its effectiveness may change according to various
conditions, therefore the system may not always be able to achieve the same
level of performance. Read the following conditions carefully. Do not overly
rely on this system and always drive carefully.
- • Conditions under which the system may operate even if there is
no possibility of a collision.
- • Conditions under which the system may not operate
properly.
- Do not attempt to test the operation of the pre-collision system yourself.
Depending on the objects used for testing (dummies, cardboard objects imitating
detectable objects, etc.), the system may not operate properly, possibly leading
to an accident.
■Pre-collision braking
- When the pre-collision braking function is operating, a large amount of
braking force will be applied.
- If the vehicle is stopped by the operation of the pre-collision braking
function, the pre-collision braking function operation will be canceled after
approximately 2 seconds. Depress the brake pedal as necessary.
- The pre-collision braking function may not operate if certain operations
are performed by the driver. If the accelerator pedal is being depressed strongly
or the steering wheel is being turned, the system may determine that the driver
is taking evasive action and possibly prevent the pre-collision braking function
from operating.
- In some situations, while the pre-collision braking function is operating,
operation of the function may be canceled if the accelerator pedal is depressed
strongly or the steering wheel is turned and the system determines that the
driver is taking evasive action.
- If the brake pedal is being depressed, the system may determine that the
driver is taking evasive action and possibly delay the operation timing of the
pre-collision braking function.
■When to disable the pre-collision system
In the following situations, disable the system, as it may not operate properly,
possibly leading to an accident resulting in death or serious injury:
- When the vehicle is being towed
- When your vehicle is towing another vehicle
- When transporting the vehicle via truck, boat, train or similar means of
transportation
- When the vehicle is raised on a lift with the engine running and the tires
are allowed to rotate freely
- When inspecting the vehicle using a drum tester such as a chassis dynamometer
or speedometer tester, or when using an on vehicle wheel balancer
- When a strong impact is applied to the front bumper or front grille, due
to an accident or other reasons
- If the vehicle cannot be driven in a stable manner, such as when the vehicle
has been in an accident or is malfunctioning
- When the vehicle is driven in a sporty manner or off-road
- When the tires are not properly inflated
- When the tires are very worn
- When tires of a size other than specified are installed
- When tire chains are installed
- When a compact spare tire or an emergency tire puncture repair kit is used
- If equipment (snow plow, etc.) that may obstruct the radar sensor or front
camera is temporarily installed to the vehicle
The pre-collision system uses a radar sensor and front camera to detect objects
(®P.206) in front of the vehicle. When the system determines that the possibility
of a frontal collision with an object is high, a warning operates to urge the driver
to take evasive action and the potential brake pressure is increased to help the
driver avoid the collision...
■ Enabling/disabling the pre-collision system
The pre-collision system can be enabled/disabled on
of the multi-information
display.
The system is automatically enabled each time the engine switch is turned to
ON...
Other information:
Functional overview
The audio control screen can be reached by the following methods:
u From the “AUDIO” button
Press the “AUDIO” button.
u From the “MENU” button
Press the “MENU” button, then select “Audio”.
Using the radio
Playing a USB memory
Playing an iPod/iPhone (Apple CarPlay*)
Using the Android Auto
Playing a Bluetooth® device
Using the steering wheel audio swi..
Add washer fluid in the following situations:
A washer does not work.
The warning message appears on the multi-information display.
NOTICE
■ Do not use any fluid other than washer fluid
Do not use soapy water or engine antifreeze instead of washer fluid. Doing
so may cause streaking on the vehicle’s painted surfaces, as well as damaging the
pump leading to problems of the washer fluid no..