Toyota Corolla: Driving procedures / Continuously variable transmission (vehicles with paddle shift switches)
Select the shift position depending on your purpose and situation.
:While the engine switch is in ON
and the brake pedal depressed*, shift the shift lever while pushing the shift release
button on the shift knob.
:Shift the shift lever while pushing
the shift release button on the shift knob...
■To protect the continuously variable transmission
If the continuously variable transmission fluid temperature is high, “Transmission
Oil Temp. High Stop in a Safe Place and See Owner’s Manual” will be displayed on
the multi-information display and the vehicle will go into transmission protection
mode automatically...
Other information:
■ Smart key system (if equipped)
Carry the electronic key to enable this function.
1 Grip the driver’s door handle to unlock the door. Holding the driver’s door
handle for approximately 2 seconds unlocks all the doors. Grip the front passenger’s
door handle to unlock all the doors...
With the engine at operating temperature and turned off, check the oil level
on the dipstick.
■ Checking the engine oil
1 Park the vehicle on level ground. After warming up the engine and turning it
off, wait more than 5 minutes for the oil to drain back into the bottom of the engine...