Toyota Corolla: Rear view monitor system / Things you should know
■ If you notice any symptoms
If you notice any of the following symptoms, refer to the likely cause and the
solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle inspected by
your Toyota dealer.
WARNING
■When using the rear view monitor system
The rear view monitor system is a supplemental device intended to assist the
driver when backing up. When backing up, be sure to visually check all around the
vehicle both directly and using the mirrors before proceeding. Observe the following
precautions to avoid an accident that could result in death or serious injuries.
- Never depend on the rear view monitor system entirely when backing up.
The image and the position of the guide lines displayed on the screen may differ
from the actual state. Use caution, just as you would when backing up any vehicle.
- Be sure to back up slowly, depressing the brake pedal to control vehicle
speed.
- The instructions given are only guide lines. When and how much to turn
the steering wheel will vary according to traffic conditions, road surface conditions,
vehicle condition, etc. when parking. It is necessary to be fully aware of this
before using the rear view monitor system.
- When parking, be sure to check that the parking space will accommodate
your vehicle before maneuvering into it.
- Do not use the rear view monitor system in the following cases:
- • On icy or slick road surfaces, or in snow
- • When using tire chains or emergency tires
- • When the trunk is not closed completely
- • On roads that are not flat or straight, such as curves or slopes
- In low temperatures, the screen may darken or the image may become faint.
The image could distort when the vehicle is moving, or you may become unable
to see the image on the screen. Be sure to visually check all around the vehicle
both directly and using the mirrors before proceeding.
- If the tire sizes are changed, the position of the fixed guide lines
displayed on the screen may change.
- The camera uses a special lens. The distances between objects and pedestrians
that appear in the image displayed on the screen will differ from the actual
distances.
NOTICE
■How to use the camera
- The rear view monitor system may not operate properly in the following
cases.
- • If the back of the vehicle is hit, the position and mounting angle
of the camera may change.
- • As the camera has a water proof construction, do not detach, disassemble
or modify it. This may cause incorrect operation.
- • When cleaning the camera lens, flush the camera with a large quantity
of water and wipe it with a soft and wet cloth. Strongly rubbing the camera
lens may cause the camera lens to be scratched and unable to transmit a
clear image.
- • Do not allow organic solvent, car wax, window cleaner or glass
coating to adhere to the camera. If this happens, wipe it off as soon as
possible.
- • If the temperature changes rapidly, such as when hot water is poured
on the vehicle in cold weather, the system may not operate normally.
- • When washing the vehicle, do not apply intensive bursts of water
to the camera or camera area. Doing so may result in the camera malfunctioning.
- Do not expose the camera to strong impact as this could cause a malfunction.
If this happens, have the vehicle inspected by your Toyota dealer as soon as
possible.
■ Area displayed on screen
A - Corners of bumper
The rear view monitor system displays an image of the view from the bumper of
the rear area of the vehicle...
The driving modes can be selected to suit driving condition.
Selecting a drive mode
Each time the switch is pressed, the system changes between sport mode and normal
mode...
Other information:
Apple CarPlay allows some applications, such as Map, Phone, and Music, to be
used on the system.
When an Apple CarPlay connection is established, Apple CarPlay compatible applications
will be displayed on the system display.
Compatible devices
Apple iPhone (iOS Ver...
► Type A
A - DOT symbol
B - Tire Identification Number (TIN)
C - Tire manufacturer’s identification mark
D - Tire size code
E - Manufacturer’s optional tire type code (3 or
4 letters)
F - Manufacturing week
G - Manufacturing year
► Type B
A - DOT symbol
B - Tire Identification Number (TIN)
C - Tire manufacturer’s identification mark
D - Manufacturer’s code
E - Manufacturing week
F -..