Toyota Corolla: Garage door opener / Erasing the entire Home- Link® memory (all three
codes)
Press and hold the 2 outside buttons for 10 seconds
until the HomeLink® indicator light changes from continuously lit (orange) to rapidly
flashing (green).
If you sell your vehicle, be sure to erase the programs
stored in the HomeLink® memory.

Press the appropriate Home- Link® button. The HomeLink®
indicator light should turn on.
The status of the opening and closing of a garage
door is shown by the indicators...
Other information:
■ Lane departure alert function
When the system determines that the vehicle might depart from
its lane or course*, a warning is displayed on the multi-information display, and
a warning buzzer will sound to alert the driver.
When the warning buzzer sounds, check the area around your vehicle and carefully
operate the steering wheel to move the vehicle back to the center of the lane.
Vehicle wi..
The following procedures may be used to start the engine if the vehicle’s battery
is discharged. You can also call your Toyota dealer or a qualified repair shop.
Restarting the engine
If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt
battery, you can jump start your vehicle by following the steps below.
1 Vehicles with an alarm: Confirm that the electronic key..